Kanguru BR-DUPE-S1 Guía de usuario descargar pdf (Pagina 16)

3.4.2 Making copies from an existing hard drive partition (hard drive models only)

Using the hard drive as the master copy source is the best way to make copies. Since you won’t need to

occupy the Reader drive with a master disc, you will have one additional drive to use for burning copies.

Using the hard disc as the master copy source improves:

• Performance - Copying from the hard drive enables the writer drives to boost the copying

performance to the limit.

• Stability - Copying from the hard drive allows a more stable duplication process than disc-to-disc

duplication.

• Durability – The hard drive is a more durable storage device than recordable discs. The recording

surface of a recordable disc is exposed and can easily be scratched, potentially corrupting data. The

hard drive is shielded and mounted inside the unit, protecting it from incidental damage.

• Convenience – With your master copy sources stored inside the hard drive, you have convenient

access to each one. There is no need to search for a master disc every time you want to make a copy;

they are all stored inside the system.

Before you can make copies from an existing hard drive partition, make sure you have loaded an image

of the Master disc onto the hard disk drive (see section 3.16.2 Load Partition, p.60) and that the hard disk

drive is selected as your source drive (see section 3.10 Select Source, p.30).

Counter :

No Counter

Kanguru Solutions

1. Copy

1. From the Main Menu, press the UP or DOWN button

to navigate to Copy. Press the ENT button to enter the

Copy menu.

2. You will see the Choose Partition menu. Use the UP or

DOWN button to select the image that you want to copy

from and then press the ENT button to confirm your

selection. Note: If you receive a “Hard drive is empty”

error message, there are no images loaded on the hard

drive. For more information on loading images, please

see section 3.16.2 Load Partition, p.60.

3. You will see the Counter screen. For more information

on the Counter, see section 3.2.2 Setting a Job Counter,

p.11.

Choose Partition

[TEST1.VEF] 401MB

Once you have set the Counter, any trays that do not contain discs in them will automatically be ejected.

You will see the following Preparation screens:

Preparing...

Waiting for Master

Preparing...

Waiting for Blanks

4. Insert discs into the drives.

Copy

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 88 89

Comentarios a estos manuales

Sin comentarios

Kanguru BR-DUPE-S1 Guía de usuario Pagina 16

Comentarios a estos manuales