Kanguru BR-DUPE-S1 Guía de usuario descargar pdf (Pagina 57)

3.15 USB Connection

The USB Connection setting allows you to turn the USB port on the back of the Kanguru Duplicator On or

Off. When turned On, the system can be connected to a computer via USB connection. If your Duplicator

came with a hard drive, you will be able to access the Duplicator’s hard drive from your computer. If your

Duplicator did not come with a hard drive, you will be able to access one or more of the Writer drives

using the computer. The default setting is Off.

Warning: If your Duplicator came with a hard drive, do not try to access the hard drive through your

computer before installing Kanguru Media Manager (see Appendix C: Kanguru Media Manager (Hard

drive models only), p.85). The Duplicator’s hard drive comes formatted in a special file system that will

not be recognized until Kanguru Media Manager is installed.

1. Connect the Kanguru Duplicator to your PC using the USB cable provided.

USB Connection :

Kanguru Solutions

12. USB Connection

2. From the Main Menu, press the UP or DOWN button to

navigate to USB Connection. Press the ENT button to

enter the USB Connection menu.

3. Press the UP or DOWN button to select On or Off. Press

the ENT button to confirm your selection.

4. If you changed the USB Connection setting, after 3 -

5 seconds you will see the Restart screen. You must

restart your Duplicator at this time.

Process Complete !

Please Restart

Note: If the “Please Restart” message does not appear, no restart is required. Press the ESC button to

return to the main menu.

5. When the system boots back up, your computer should recognize a DVD drive or Hard drive,

depending on the model you purchased.

Note: While USB Connection is turned On, the drive that is being enabled for USB functionality will be

disabled on the Duplicator.

1 to 1 Duplicator users: When you turn USB Connection on, your Duplicator will display a “No Writers

Enabled” error message when you reboot your system. Turn USB Connection off in order to get rid of

this message.

USB Connection

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 88 89

Sin comentarios

Kanguru BR-DUPE-S1 Guía de usuario Pagina 57