Kanguru BR-DUPE-S1 Guía de usuario descargar pdf (Pagina 86)

Using Kanguru Media Manger

After you have successfully installed the Kanguru Media Manager onto your computer, you can now copy

or save DVD image files or LightScribe label files to the Kanguru Duplicator’s hard drive through your

computer.

Warning! Do not try to access the Duplicator’s hard drive through your computer before you have

installed Kanguru Media Manager. If you try to access the Duplicator’s hard drive through your computer

before installing the Kanguru Media Manager, your computer will not be able to recognize the file format

and you will be prompted to format the hard drive. Do not format the hard drive; doing so will erase any

data stored on the hard drive.

1. Connect the Kanguru Duplicator to your computer via USB using the provided USB cable.

2. From the Duplicator’s main menu, turn the USB Connection setting to On (see section 3.15 USB

Connection, p.57). This will require you to restart the Duplicator.

Note: While the USB Connection setting is On, you will not be able to access the Duplicator’s hard

drive from the Duplicator. You can only access the Duplicator’s hard drive from the Duplicator

when the USB Connection setting is Off.

3. When the Duplicator boots up, a new Hard Disk Drive named Duplicator will appear under My

Computer.

4. Copy/Save your DVD image (.iso) or LightScribe label (.lsi) files to the Duplicator’s hard drive

○ DVD image files (.iso) - Copy/Save your .iso image files in the folder named Dup on the

Duplicator’s hard drive. All image files must be stored in this folder for proper functionality.

○ Lightscribe label files (.lsi) - Copy/Save your .lsi label files in the folder named Label on the

Duplicator’s hard drive. All label files must be stored in this folder for proper functionality.

5. When you have finished copying your .iso image file(s) to the Kanguru Duplicator, turn the USB

Connection setting to Off (see section 3.15 USB Connection, p.57). This will require you to restart

the Duplicator.

6. Disconnect the USB cable.

When the Duplicator boots up, you will be able to access the Duplicator’s hard drive from the Duplicator

again.

Note: The Kanguru Duplicator comes with ImgBurn software which can be used to create .iso image files

from DVDs. ImgBurn is a 3rd party software and is not supported by Kanguru Solutions. For ImgBurn

information or support, please check the ImgBurn website at : www.imgburn.com

Appendix C: Kanguru Media Manager

1 2 ... 81 82 83 84 85 86 87 88 89

Sin comentarios

Kanguru BR-DUPE-S1 Guía de usuario Pagina 86