Kanguru BR-DUPE-S1 Guía de usuario descargar pdf (Pagina 67)

3.17.2 Printing LightScribe Labels from the hard drive (LightScribe models with hard drive only)

Before you can print LightScribe labels from the hard drive, make sure you have loaded your .lsi files onto

the hard drive (see section 3.13.15.1 Load Label (LightScribe models with hard drive only), p.51) and that

the hard disk drive is selected as your source drive. For more information on selecting your source drive,

please see section 3.13.15.6 Select Loading Drive, p.55.

Note: Make sure that the USB Connection setting is turned Off. If the USB Connection setting is On then

your duplicator will be unable to access the hard drive.

Preparing... H

Please Insert Label Disc

1. From the Main Menu, press the UP or DOWN button

to navigate to Print LightScribe Label. Press the ENT

button to enter the Print LightScribe Label menu.

2. You will see the Select Label screen. Press the UP or

DOWN button to select a LightScribe Label file. Press

the ENT button to confirm your selection.

3. You will see the Counter screen. For more information

on the Counter, see section 3.2.2 Setting a Job Counter,

p.11.

Once you have set the Counter, any trays that do not

contain discs in them will automatically be ejected. You

will see the Preparation screen.

Counter :

No Counter

Please Select Label

[LSlabel.lsi] 7M

Kanguru Solutions

13. Print LightScribe Label

4. Place the LightScribe discs into the Writer drives label-side down. Note: Only insert LightScribe

printable discs into the Writer drives.

Printing... H

LSlabel 0 45%

5. After you’ve loaded the drives with discs, close the trays

and allow 5 - 10 seconds for the system to detect them.

Once all the discs have been recognized, you will see the

Print Progress screen.

6. Once the Print process has been completed, you will see the following screen.

Pass 7 Fail 0 ( 7)

Waiting for Blanks

• PASS 7 - number of discs successfully printed.

• FAIL 0 - number of discs that failed to print.

• ( 7 ) - number of prints made for this job so far.

Print LightScribe Label

1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 88 89

Sin comentarios

Kanguru BR-DUPE-S1 Guía de usuario Pagina 67