Kanguru BR-DUPE-S1 Guía de usuario descargar pdf (Pagina 20)

3.6 Copy & Compare

This Copy & Compare function combines the Copy function (see section 3.4 Copy, p.14) and the Compare

function (see section 3.5 Compare, p.18). When selected a Copy process will begin, and after the Copy

process has completed a Compare process is automatically run in order to ensure that the data copied over

successfully.

Counter :

No Counter

Kanguru Solutions

3. Copy & Compare

1. From the Main Menu, press the UP or DOWN button to

navigate to Copy & Compare. Press the ENT button to

enter the Copy & Compare menu.

2. You will see the Counter screen. For more information

on the Counter, see section 3.2.2 Setting a Job Counter,

p.11.

Once you have set the Counter, any trays that do not contain discs in them will automatically be ejected.

You will see the following Preparation screens:

Preparing...

Waiting for Master

Preparing...

Waiting for Blanks

3. Insert discs into the drives.

After you’ve loaded the drives with discs, close the trays and allow 5 - 10 seconds for the system to detect

them. If either of the preparation screens are displayed for more than 2 minutes after you have inserted

your discs, please check the quality of the discs.

Once all the discs have been recognized, you will see the Confirmation screen.

Preparing :

7 Discs Detected : Go?

Preparing...

Please Wait

Note: The “7” indicates that there are seven discs recognized

by the Writers. The actual quantity may be different

depending on the number of discs you have inserted.

4. When the number of discs detected matches the number

of blank discs you inserted, press the ENT button. You

will see the Processing screen.

Copy & Compare

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 88 89

Sin comentarios

Kanguru BR-DUPE-S1 Guía de usuario Pagina 20